吸附
亚甲蓝
纤维素
响应面法
材料科学
聚乙二醇
中心组合设计
醋酸纤维素
壳聚糖
复合数
化学工程
阳离子聚合
聚乙烯
核化学
色谱法
高分子化学
复合材料
有机化学
化学
催化作用
工程类
光催化
作者
Fira Rizky Ramadhan,Talitha Adella Assegaf,Citra Kartika Asri,Nurul Rahmawati,Hikmatun Ni’mah,Firman Kurniawansyah,Lailatul Qadariyah,Juwari Juwari
摘要
Textile dyes waste can cause a big problem for the environment. Adsorption is a simple approach in treatment of textile dyes waste. On the other hand, the use of disposable adsorbents also creates production cost problems because they are less economic. Currently, research on adsorbents is forwarded to the use of biopolymers such as chitosan, chitin, and cellulose. This research studied the use of cellulose beads, made from cellulose acetate (CA) blended with polyethylene glycol 200 (PEG200), as adsorbent in removing cationic dye of methylene blue (MB). Adsorption performance of cellulose beads was evaluated and optimized under variation of adsorption conditions (pH, beads dose, dye concentration) and PEG200 content. Optimization was carried out by using response surface methodology (RSM) with a face-centered central composite design (FCCD) model. The results showed that the optimum condition was obtained at pH of 7, beads dose of 2 g/L, dye concentration of 20 mg/L for bead composition of CA/PEG200 (90/10). The optimum % dye removal predicted by the design model was 52.4706 %.
科研通智能强力驱动
Strongly Powered by AbleSci AI