Intelligent vehicle trajectory tracking control based on physics-informed neural network dynamics model

In order to solve the accuracy problem of trajectory tracking control method based on data-driven model, an intelligent vehicle trajectory tracking control method based on physics-informed neural network (PINN) vehicle dynamics model is proposed. Aiming at the problem of poor interpretability of data-driven model, a vehicle dynamics model based on the PINN is established, and the physics-driven deep learning method is used instead of the data-driven deep learning method to obtain the dynamic characteristics of the intelligent vehicle, to benefit from both the physical-based method and the data-driven method. A sequential training method is also proposed to solve the coupling problem when training multiple PINNs simultaneously. The model takes the nonlinearity of the neural network model and physical interpretability into consideration compared to the standard neural network model. Then, based on the PINN vehicle dynamics model, a trajectory tracking controller based on the iterative linear quadratic regulator (ILQR) control algorithm is developed. The optimal control law is derived by optimizing the ILQR control algorithm to implement the intelligent vehicle’s precise and stable tracking for the desired trajectory. The Levenberg-Marquardt (LM) algorithm and line search technology are used and damping factor adjustment rules are set up to enhance the convergence performance of the ILQR control algorithm. In order to verify the effectiveness of the proposed method, the simulation is conducted under the condition of double lane change. The simulation results demonstrate that the proposed method can track the reference trajectory accurately under the limited conditions. Its control performance is much better than other algorithms.