Exploration of Mechanical Properties of Enset–Sisal Hybrid Polymer Composite

Enset and sisal fibers are among the most widely used reinforcement to fabricate natural fiber-based composite materials. Hand lay-up techniques were employed in this study to fabricate enset–sisal (E/S) hybrid fiber composite with volume ratios of 100/0, 75/25, 50/50, 25/75, and 0/100 and constant polyester resin. The tensile, flexural, impact strength, water absorption and morphological properties of the fabricated composite were investigated experimentally. The effects of hybridization to volume ratio were determined and the results show that hybrid composites excel in mechanical properties, compared with single composites. For better mechanical properties, the enset fiber has been hybridized with sisal fiber. Tensile and flexural strengths were enhanced by 47.3% and 41.03%, respectively, at 50/50 E/S volume ratio compared with 100/0 E/S composite. The impact strength of sisal fiber composite was improved by adding enset fiber in the composites. The inherent benefits and limitations of these two fibers were balanced out by each other in a positive way. While sisal fiber helped the composite intermesh of tensile, flexural, and reduction of water absorption, enset ensured impact strength. Morphological analysis was carried out in order to observe the fracture behavior and fiber pull-out of the samples by means of scanning electron microscopy.