Nonaqueous Phase Synthesis of Copper Nanoparticles

Copper nanoparticles were synthesized in a nonaqueous solution of cetyltrimethylammonium bromide with isopropanol as a solvent. Cetyltrimethylammonium bromide in isopropanol is observed to play a role as a catalyst where isopropanol is the reducing agent. The surface plasmon band characteristic for Cu nanoparticles can be observed at approximately 560 nm in the UV-visible spectra at molar ratios for Cu2+: cetyltrimethylammonium bromide of 1:15 and 1:30. On the other hand, at molar ratios of 1:0.25 and 1:1 the presence of peak at approximately 310 nm can be attributed to oligomeric clusters of Cu0. Formation of Cu0 was further confirmed from the X-ray diffraction analysis. The diffractograms exhibited peaks at 2theta = approximately 41.6 degrees, approximately 51.6 degrees, and approximately 74.3 degrees, corresponding to Cu0. At lower concentration of cetyltrimethylammonium bromide (i.e., Cu2+: cetyltrimethylammonium bromide = 1:0.25) higher degree of size dispersity (particles between approximately 5-20 nm) can be noted from transmission electron micrograph. On the other hand, at the highest concentration of cetyltrimethylammonium bromide (i.e., Cu2+: cetyltrimethylammonium bromide = 1:30), formation of finer sized particles with a lower degree of size variation, approximately 2-10 nm, can be observed.