喷嘴
喷射(流体)
电流体力学
计算机模拟
机械
过程(计算)
材料科学
机械工程
工程类
计算机科学
电场
物理
量子力学
操作系统
作者
Yanqiao Pan,Liangcai Zeng
出处
期刊:Micromachines
[Multidisciplinary Digital Publishing Institute]
日期:2019-01-29
卷期号:10 (2): 94-94
被引量:52
摘要
Droplet generation process can directly affect process regulation and output performance of electrohydrodynamic jet (E-jet) printing in fabricating micro-to-nano scale functional structures. This paper proposes a numerical simulation model for whole process of droplet generation of E-jet printing based on the Taylor-Melcher leaky-dielectric model. The whole process of droplet generation is successfully simulated in one whole cycle, including Taylor cone generation, jet onset, jet break, and jet retraction. The feasibility and accuracy of the numerical simulation model is validated by a 30G stainless nozzle with inner diameter ~160 μm by E-jet printing experiments. Comparing numerical simulations and experimental results, period, velocity magnitude, four steps in an injection cycle, and shape of jet in each step are in good agreement. Further simulations are performed to reveal three design constraints against applied voltage, flow rate, and nozzle diameter, respectively. The established cone-jet numerical simulation model paves the way to investigate influences of process parameters and guide design of printheads for E-jet printing system with high performance in the future.
科研通智能强力驱动
Strongly Powered by AbleSci AI