法拉第效率
X射线光电子能谱
电化学
锂(药物)
阴极
材料科学
兴奋剂
扫描电子显微镜
离子
电池(电)
化学工程
分析化学(期刊)
化学
电极
光电子学
复合材料
物理化学
工程类
物理
有机化学
色谱法
医学
内分泌学
功率(物理)
量子力学
作者
Yabin Xu,Meixia Zhang,Yi Li,Kui Liang
标识
DOI:10.1016/j.jallcom.2021.158899
摘要
Abstract The Li-rich Mn-based cathode materials exhibit great potential due to their ultrahigh specific capacity, but still suffer from low initial coulombic efficiency, inferior cycling stability, voltage decay and poor rate performance. In this study, we propose to enhance the structural stability and the electrochemical performances of Li1.20Mn0.56Ni0.16Co0.08O2 through the co-doping of Fe3+ and PO43-. The Fe3+ and PO43- are simultaneously doped in the precursor via a novel wet chemical method. In comparison with the undoped or mono-doped samples, the co-doped sample exhibits the best electrochemical performances owing to the synergistic effect of Fe3+ and PO43-, such as a high initial coulombic efficiency (88%), great cyclic stability (remains a specific capacity of 214 mAh g−1 after 130 cycles at 1 C) and mitigated voltage fade (2.12 mV per cycle). The synergistic mechanism of Fe3+ and PO43- is revealed based on X-ray diffraction, transmission electron microscope, scanning electron microscopy, X-ray photoelectron spectroscopy and electrochemical measurements. The co-doping of Fe3+ and PO43- constructs a stable oxygen-packed framework, which can alleviate lattice distortion, reduce the mixing of cations and increase the reversible reaction of 2 O2-/(O2)n-, contributing to outstanding structural stability. The synergetic strategy of anion and cation and the co-doping method in this work may provide some inspiration for designing the high-performance cathode materials of Lithium-ion battery.
科研通智能强力驱动
Strongly Powered by AbleSci AI