This article confirms the physical significance of a new method for determining adsorption energy distributions in porous materials. The premise of the model is that an adsorption isotherm consists of several equilibrium processes corresponding to adsorption into a distinct pore size regime. A distribution type equilibrium constant, K, involving the gas and adsorbate in a pore of capacity n describes each process. In order to define the n 's and K 's for all the processes involved, isotherms are collected at several temperatures to minimize the ratio of unknowns to knowns. In this article the model is extended to a series of adsorptives and it is shown that the resulting K 's, Δ H 's, and n 's are not meaningless empirical fit parameters but have the meaning suggested by the model. The Δ G 's vary linearly with Δ H for each pore size regime and both correlate linearly with the square root of the van der Waals a parameter, a 1/2 . In addition to providing strong support for the physical significance of the parameters, these correlations enable prediction of the K values for adsorption of a new adsorptive by a characterized adsorbent given the a parameter of the adsorptive. The correlations show that the strongest binding corresponds to the adsorptive selecting pores from the distribution available that match its molecular dimensions. The n 's for the different adsorptives provide insight into the pore distribution in the solid and about the pores utilized in the adsorption of different adsorptives. Prediction of the K 's from a and estimating n 's from molecular diameters is suggested as a way to attain the long-range goal of predicting the total isotherm for a new adsorptive from molecular properties. The practical application of this information for use in separations is illustrated. The concept of effective pressure, P eff, is introduced for catalysis to allow comparison of the concentrating effect of different microporous solids.