亲爱的研友该休息了!由于当前在线用户较少,发布求助请尽量完整地填写文献信息,科研通机器人24小时在线,伴您度过漫漫科研夜!身体可是革命的本钱,早点休息,好梦!

Asymmetrical pythagorean-hodograph (PH) spline-based C3 continuous corner smoothing algorithm for five-axis tool paths with short segments

平滑的 算法 方向(向量空间) 花键(机械) 机械加工 几何学 平滑样条曲线 多边形(计算机图形学) 计算机科学 数学 工程类 计算机视觉 机械工程 结构工程 样条插值 双线性插值 帧(网络)
作者
Min Wan,Xue-Bin Qin,Qun-Bao Xiao,Yang Liu,Weihong Zhang
出处
期刊:Journal of Manufacturing Processes [Elsevier BV]
卷期号:64: 1387-1411 被引量:54
标识
DOI:10.1016/j.jmapro.2021.02.059
摘要

Local corner smoothing is widely used for the G01 motion commands to achieve the motion continuity of transition corners. Most splines constructed by the existing local corner smoothing methods oriented for five-axis machining mainly must be connected by linear segments. However, with respect to the five axis machining of the corners with short line segments, these kinds of methods need that both ends of the constructed splines usually must be shrunk with the same proportion to avoid the overlapping of adjacent splines. This will lead to relatively large curvatures of the obtained trajectories together with relatively low machining efficiency. This article proposes a new real-time corner smoothing algorithm for five-axis machine tools by constructing the C3 continuous asymmetrical PH splines. The typical characteristic lies in that the control points related to the two ends of the PH spline can be independently adjusted through reasonably introducing two more adjustable variables, which are realized by analytically calculating and then adding two additional control points into the corresponding control polygon. As a result, the PH spline poses the property of the asymmetry about the angular bisector. Based on this, the short linear commands of tool tip and tool orientation can be smoothed only through inserting different lengths of asymmetrical PH splines that can be connected directly. The motion variance of the smoothed tool orientation related to the tool tip displacement is analytically proved to be C3 continuous, and thus, the synchronization between tool tip and tool orientation is guaranteed. The outstanding advantage of the algorithm for short line segments is twofold. The first is that the performance of the drives can be more fully utilized to reduce cycle time since the curvature around corners are reduced by adopting the asymmetrical profile, and the second is that the synchronization procedure is greatly simplified since the algorithm eliminates the requirement to convert the intermediate line segments into a spline between the adjacent connected PH splines. Both simulation and the experimental results demonstrate that the proposed algorithm can realize a higher machining efficiency.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
xinran完成签到,获得积分10
5秒前
温暖的帆布鞋完成签到,获得积分10
8秒前
yli130完成签到,获得积分10
9秒前
9秒前
15秒前
Sarahminn发布了新的文献求助10
16秒前
18秒前
俏皮的灵发布了新的文献求助10
19秒前
机灵的沂完成签到,获得积分10
31秒前
奔跑的应助被虚心的灵寒采纳,获得10
32秒前
奔跑的应助被虚心的灵寒采纳,获得10
32秒前
欢呼的兰完成签到,获得积分10
35秒前
华仔的应助被lmn采纳,获得10
39秒前
酒酿是也完成签到 ,获得积分10
39秒前
满意的楷瑞完成签到,获得积分10
41秒前
顺利的水瑶完成签到 ,获得积分10
43秒前
46秒前
我是老大的应助被科研通管家采纳,获得10
46秒前
彭于晏的应助被科研通管家采纳,获得10
46秒前
46秒前
48秒前
慕青的应助被肖可声采纳,获得10
48秒前
田様的应助被重要白亦采纳,获得10
50秒前
科研通AI6.2的应助被Jeff采纳,获得20
51秒前
科研通AI6.3的应助被Jeff采纳,获得50
51秒前
烟花的应助被俏皮的灵采纳,获得10
52秒前
lmn发布了新的文献求助10
53秒前
58秒前
Maestro_S的应助被Kaikai采纳,获得10
59秒前
1分钟前
肖可声完成签到,获得积分10
1分钟前
mino完成签到 ,获得积分10
1分钟前
1分钟前
肖可声发布了新的文献求助10
1分钟前
铃木完成签到,获得积分10
1分钟前
重要白亦发布了新的文献求助10
1分钟前
1分钟前
1分钟前
简啦啦完成签到 ,获得积分10
1分钟前
迅速的天玉完成签到,获得积分20
1分钟前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8172954
求助须知:如何正确求助?哪些是违规求助? 9565447
关于积分的说明 21780029
捐赠科研通 7764817
什么是DOI,文献DOI怎么找? 3431496
关于科研通互助平台的介绍 2555519
邀请新用户注册赠送积分活动 2476571