材料科学
挤压
复合材料
聚丙烯
纳米复合材料
剪切(地质)
氮化硼
色散(光学)
三元运算
计算机科学
程序设计语言
物理
光学
作者
Dingyao Liu,Lingyu Wu,Kai Wu,Shuman Xu,Guopeng Sui,Mengfan Jing,Jing Zhao,Yuan Wei,Qiang Fu
标识
DOI:10.1016/j.compositesa.2019.01.022
摘要
Abstract The energy density of a film capacitor is proportional to the square of the breakdown strength (BDS) of the material. However, polymer composites’ BDS is usually compromised by the filler’s agglomeration, thus resulting in very limited increase in the energy density. In this work, we adopted a high-shear extrusion technique to improve filler’s dispersion. A synergistic effect between montmorillonite (oMMT) and boron nitride (BN) on BDS of polypropylene was observed, particularly for samples prepared by high shear extrusion. As a result, the energy density of PP can be improved from 2.98 J/cm3 to as high as 5.14 J/cm3 while energy discharged efficiency barely changed. In addition, we have also demonstrated that PP/oMMT/BN ternary composites prepared by high shear extrusion show much improved mechanical properties. This work offers a scalable fabrication of PP based nanocomposites with superior energy density that could be easily achieved by using hybrid fillers and high shear extrusion.
科研通智能强力驱动
Strongly Powered by AbleSci AI