Multi-fiber needle-punched nonwoven composites: Effects of heat treatment on sound absorption performance

Nonwovens have been increasingly used in car interiors for noise reduction. Most of these nonwovens are subjected to thermal treatments to give the nonwovens their final three-dimensional forms. Therefore, it became crucial to investigate the effects of thermal treatment on sound absorption characteristics of nonwovens. In this study, the effects of the material and treatment parameters on airflow resistivity and normal-incidence sound absorption coefficient of thermally treated three-layered nonwoven composites have been studied. The material parameters included fiber size and porosity. The treatment factors included the temperature and duration. The thermally treated three-layered nonwoven composites are classified into three types based on the material content and fiber blend. Sandwich structures consisting of polylactide/hemp/polylactide and polypropylene/glassfiber/polypropylene layers were called LHL and PGP, respectively. The sample which consisted of three layers of an intimate blend of polypropylene-glassfiber was named as PGI. Both temperature and duration of thermal treatment have been found to affect air flow resistivity and sound absorption. An increase in air flow resistivity and a decrease in sound absorption have been detected with heat treatment. A similarity has been observed between the thermal behaviors of PGP and PGI, which included the same thermoplastic polymer fiber. Variation in air flow resistivity of sandwich structure nonwoven composites increased with the increase in temperature, which was not observed in the intimate blend ones. The air flow resistivity of heat-treated nonwovens followed a steeper trend compared to unheated nonwovens per change in material parameters. In terms of treatment parameters, the difference between the thermal treatment and the melting point of the thermoplastics constituent of the nonwoven composite was found to be a significant factor on sound absorption. This effect of treatment temperature on sound absorption changed with treatment duration. The sound absorptive characteristic of the nonwoven composites in terms of sound frequency underwent a change with thermal treatment due to the structural changes with exposure to high temperature.