A Silica–Lignin Hybrid Filler in a Natural Rubber Foam Composite as a Green Oil Spill Absorbent

Oil spills in the marine environment are a rising concern due to their adverse impacts on living creatures and the environment. Hence, remediation methods have been used to remove the oil from the contaminated water. A sorbent material is considered the best method for oil spill absorption. However, commonly used commercial sorbents are made from nonrenewable and nonenvironmentally friendly materials. In this research, natural rubber foam (NRF) was used as a sorbent material with the addition of a filler, i.e., silica and a silica–lignin hybrid, to increase its oil sorption capacity and reusability. The silica and silica–lignin hybrid were extracted from rice husk waste by means of the precipitation method. The silica–lignin hybrid-filled NRF exhibited excellent hydrophobicity, with a water contact angle of 133°, and had more stable reusability compared to unfilled NRF and silica-filled NRF. In addition, the optimum oil absorption capacity of silica–lignin hybrid-filled NRF was 1.36 g g−1. Overall, the results showed that silica–lignin hybrid-filled NRF has the potential to be developed as a green oil absorbent material and is promising in terms of economic and environmental aspects.