计算机科学
建筑
人工智能
计算机视觉
电子工程
图像处理
电压
灰度级
信号处理
光学
频率响应
电气工程
工程类
图像分辨率
计算机图形学(图像)
系统体系结构
阴极射线管
计算机硬件
作者
Younsik Kim,方梅萱,Kyunghoon Chung,Byungchang Yu,Jaemyung Lim,Oh‐Kyong Kwon
出处
期刊:IEEE Transactions on Circuits and Systems I-regular Papers
[Institute of Electrical and Electronics Engineers]
日期:2026-01-01
卷期号:: 1-12
标识
DOI:10.1109/tcsi.2026.3743147
摘要
This paper proposes an analog pulse-width modulation (A-PWM)–based LED-on-Silicon microdisplay driver with a 4T2C pixel circuit and a ramp driver to achieve high resolution, fine gray-level control, and high luminance uniformity. A compact 4T2C pixel circuit with an in-pixel amplifier reduces the transition time of the PWM signal while enabling high-resolution integration. Furthermore, the ramp driver sequentially provides ramp signals to each ramp line, thereby maximizing pixel emission time and achieving accurate low-gray level expression. The ramp driver also incorporates an error tracker to detect its accumulated voltage errors, thereby improving the channel-to-channel uniformity of the pixel circuit. A$33\times 32$pixel-circuit array with peripheral drivers was fabricated using a 180-nm CMOS process as a prototype to verify the proposed architecture targeting a 4K$\times 4$K microdisplay. The sub-pixel area was designed to be$6.3~\mu $m$\times 2.1~\mu $m, achieving a pixel density of 4000 PPI. The transition times of the pixel circuit were simulated to be$43~\mu $s at mid-to-high gray levels and 34 ns at low gray levels, with a maximum emission duty of 99.95%, enabling accurate expression of gray levels from 3 to 255. The worst-case emission current error (ECE) was measured to be + 2.9/–2.8 LSB across all gray levels, demonstrating high uniformity without compensation. The worst-case ECE due to accumulated voltage error in the ramp driver was simulated to be less than 0.8 LSB, verifying that the error tracker improves the channel-to-channel uniformity of the pixel circuit.
科研通智能强力驱动
Strongly Powered by AbleSci AI