MR elastography is a good response parameter for microwave ablation liver tumors

To determine the response of hepatic tissue to percutaneous microwave ablation (MWA) of liver tumors via MR elastography in a clinical setting using MRI and MR elastography.51 Patients (28 m, 23f) underwent MWA of liver tumors (HCC: 20, metastasis: 31) and received MRI and MR elastography immediately before and 24 h after MWA. Retrospective analysis included pre- and post-ablative tumor extent, T1/T2 mapping and stiffness values as well as the duration and energy dose of the MWA session.Total liver stiffness increased by 4.3% from 3.31 kPa to 3.45 kPa (p = 0.036). Total liver stiffness post-MWA significantly correlated with the duration of the MWA session (r = 0.369, p = 0.008). The higher the baseline tumor stiffness was, the more energy had to be applied in MWA (r = 0.391, p < 0.001) and the longer the duration of the session (r = 0.391, p = 0.007). Healthy parenchyma stiffness increased by 3.5% from 3.55 kPa to 3.68 kPa (p = 0.142) and was strongly influenced by the cumulative energy (r = 0.436, p < 0.001), the duration (r = 0.458, p < 0.001) and the energy intensity (r = 0.458, p < 0.001) of MWA. 43 patients had a technically successful ablation result (margin ≥ 5 mm). Those with successful ablation had increased ablation margin stiffness (5.3 kPa vs. 4.6 kPa, p = 0.26) and had received higher ablation intensity than those with unsuccessful ablation (5.73 kJ/min vs. 5.03 kJ/min, p = 0.002).Additional MRE may be used before and after MWA to assess treatment response and collateral tissue damage after MWA. Baseline tumor stiffness helps finding the appropriate MWA parameters.