Study on Characteristics of Two Phase Flow Field in Grinding Zone of Large Spiral Angle Groove Wheel

Aiming at the high specific removal energy and heat generation rate in grinding process, and the low heat transfer efficiency in grinding arc zone of ordinary grinding wheel, the problems of local high temperature and grinding burn are easy to occur. In this paper, the plane grinding of grooving wheel with large spiral Angle is taken as the research object, and the numerical analysis model of gas-liquid two-phase flow field in wedge zone and grinding arc zone is established. The enhancement mechanism of heat transfer performance in grinding arc of large spiral Angle groove wheel was investigated. The results show that the flow of grinding fluid into the grinding arc will be hindered by the airflow around the grinding wheel, resulting in backflow and side leakage. Compared with ordinary grinding wheels without grooves, the backflow and side drainage in grinding zone of big spiral Angle grooves grinding wheels are significantly reduced, and a large amount of grinding fluid is transported in the heat exchange channel. The spiral groove has a good conduction effect on the grinding fluid, and the grinding fluid is easier to enter the grinding zone, thus significantly improving the heat transfer performance of the grinding zone and effectively reducing the grinding temperature during the grinding process.