光催化
乙二醇
水溶液
热液循环
材料科学
砷
可见光谱
化学工程
废水
甘油
纳米技术
化学
催化作用
有机化学
环境工程
冶金
光电子学
工程类
作者
Jun Hu,Sunxian Weng,Zuyang Zheng,Zengxia Pei,Mianli Huang,Ping Liu
标识
DOI:10.1016/j.jhazmat.2013.11.027
摘要
BiOI photocatalysts with tunable morphologies from 2D laminar structure to 3D hierarchitectures have been prepared by a hydrothermal or solvothermal way using four kinds of solvents: water, ethanol, ethylene glycol and glycerol (these solvents are abbreviated as H2O, ETH, EG, and GLY hereinafter). The viscosity of the solvents plays a key role to the evolution on the morphologies and performances of BiOI samples. The BiOI synthesized in GLY exhibits excellent visible-light photocatalytic performances toward As(III), which is highly increased to that of N-TiO2. Further investigation reveals that the surface characteristics of BiOI nanosheets, the thickness of the nanosheets, and the way by which they integrate together play important roles in photocatalytic reaction process. The main active species is detected as O2−. Considering about the practical use, the BiOI synthesized in GLY is also work under illumination of natural sunlight, and total arsenic concentration can be decreased even below 10 μg/L from 1 mg/L As(III) aqueous solution within 3 h, which has reached the drinking water standard (0.01 mg/L). Moreover, its stable performance also shows its great potential application value in the wastewater treatment.
科研通智能强力驱动
Strongly Powered by AbleSci AI