Estimation of Vs30 and site classification of Bhaktapur district, Nepal using microtremor array measurement

Abstract The severe damage observed in the Kathmandu Basin, Nepal, during past earthquakes necessitates a thorough study of the seismic behavior of the basin sediments. As the shear-wave velocity is directly related to the elastic shear modulus of the material, it is essential to determine it to incorporate the behavior of the soil in the design of the structure. Hence, we determined average shear-wave velocity in upper 30 m (Vs30) of soil in Bhaktapur district in the eastern part of the Kathmandu Basin at 73 observation points, employing two methods involving the use of non-invasive microtremor array measurements (MAMs). These MAMs are widely used for determining subsurface soil characteristics by analyzing the ambient vibrations of the ground. The first method involves inversion using a genetic algorithm, and the second is a method for obtaining Vs30 directly from the dispersion curve. We found that Vs30 in the southeastern part of the study area was higher than that in other parts. Conversely, Vs30 in the western region was lower. The calculated Vs30 values were used to classify the sites. The elevated eastern and southeastern areas with high Vs30 were categorized as dense soil or soft rock, whereas the areas with low Vs30 that had suffered significant damage during the 2015 Gorkha earthquake were classified as soft soil sites. Graphical Abstract