Influence of cooling rate on ω phase precipitation and deformation mechanism of a novel metastable β titanium alloy

This work investigated the effect of cooling rate (water quenching and air cooling) on the precipitation of ω phase after solution treatment in β-phase region, and its effect on the mechanical properties in a novel metastable β titanium alloy (Ti–5Mo–3Cr–Fe–3Zr). The initial microstructures, phase composition and deformation-induced microstructures have been investigated using SEM, EBSD, XRD, and TEM. The phase composition of water-quenched alloy and air-cooled alloy are β, α", and ω phase. The size and volume fraction of ω phase of air-cooled alloy are larger than that of water-quenched alloy, resulting in an increase in tensile strength and a decrease in ductility. Deformation mechanisms of Ti–5Mo–3Cr–Fe–3Zr alloy with different cooling rate change from stress-induced ω phase transformation and dislocation slip to only dislocation slip. The stress-induced ω lamellas parallel to [1-11]β direction along the [0001]ω1 direction, which is formed by {112}β<111>β slip. Dislocations can cut through the encountered ω phase to form ω-free deformation bands, which accounts for the ductility.