计算机模拟
金属薄板
过程(计算)
成形工艺
生产(经济)
过程模拟
计算机科学
仿真软件
软件
机械工程
工程类
模拟
操作系统
宏观经济学
经济
程序设计语言
作者
David Koreček,Pavel Solfronk,Jiří Sobotka
出处
期刊:Manufacturing Technology
[Jan Evangelista Purkyně University in Ústí nad Labem]
日期:2020-12-07
卷期号:20 (5): 625-631
被引量:9
标识
DOI:10.21062/mft.2020.103
摘要
The submitted paper describes the utilization of numerical simulations to predict sheet metal forming process of ultra-high strength TRIP steel HCT690T EN 10346. Numerical simulations of production processes are increasingly becoming an integral part of the pre-production stage of the sheet metal forming processes. Furthermore, it is possible to use these numerical simulations not only in the production itself (e.g. to test the validity of the process or influence of process parameters, etc.), but also in the post-production stage as a tool for various controls and comparative measurements with the real processes, testing the capacity of the process and so on. For proper and the reliable course of the numerical simulation must be at first obtained and then entered the correct input data into the numerical simulation software. This data enters into the simulation in the form of definition the material computational model. Such computational model is defined by using material data and individual material characteristics at different loading methods. With regard to the material model and the given process parameters, it is possible to realize the process simulation, which takes place in the numerical simulation software – in this paper was used PAM STAMP 2G from the French company ESI Group.
科研通智能强力驱动
Strongly Powered by AbleSci AI