化学工程
结晶度
差示扫描量热法
纳米纤维素
微晶纤维素
Zeta电位
皮克林乳液
材料科学
硫酸
核化学
水解
傅里叶变换红外光谱
乳状液
化学
纤维素
纳米颗粒
有机化学
结晶学
纳米技术
热力学
物理
工程类
作者
Hongcai Zhang,Yanan Qian,Shunsheng Chen,Yanyun Zhao
标识
DOI:10.1016/j.foodhyd.2019.05.023
摘要
Abstract The emulsion stability of sulfated cellulose nanocrystals (CNCs) (with different sulfur contents of 0.436, 0.882 and 1.499 mmol/g, representing as CNCs-L, -M and –H) on medium chain triglyceride (MCT) oil/water (O/W, 30/70, v/v) Pickering emulsions (PE) was modulated by tuning sulfuric acid (H2SO4) concentrations at 22.72, 37.03 and 46.86 wt% during hydrolysis of microcrystalline celluloses (MCCs). CNCs-L, -M, or –H as the sole stabilizer was incorporated into O/W PE for improving emulsification and dispersion stabilities. CNCs–H had smaller diameter (64.74 nm), higher Zeta-potential (ZP) (−47.96 mV) and crystallinity index (CrI) (86.2%), and lower average length (75.74 nm) and a width (10.31 nm) than those of CNC-M and CNC-L. Fourier transform infrared spectrometer (FT-IR), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis indicated that –OSO3- groups from the sulfuric acid (H2SO4) were incorporated to the surface of CNCs during acid hydrolysis. The CNC–H had the highest storage stability, followed by CNCs-M and L, consistent with their sulfur content and surface charge (SC) of O/W PE (46.25, 52.33 and 62.24%), respectively. This study indicated that sulfated CNCs had great potential as fillers and emulsifiers of network structure of emulsion for application in food and other fields.
科研通智能强力驱动
Strongly Powered by AbleSci AI