6‐2: Holographic Display Enabled with Light Modulation in both Amplitude and Phase in A Single LCoS‐Based Spatial Light Modulator

Holographic display enabled by performing both amplitude modulation (AM) and phase modulation (PM) in a single Liquid Crystal on Silicon (LCoS)‐based Spatial Light Modulator (SLM) is introduced. Light propagation is manipulated in two different directions to perform both AM and PM via liquid crystals alignment layer which can be based on technologies by using photoalignment, nano‐imprint lithography (NIL), or unique over‐driving across Liquid Crystal (LC) layer of Vam‐Vpm method which are described and proved to be effective to tune incident light, control the polarization and propagation of the light entering the liquid crystals of a single LCoS‐based SLM (LCoS‐SLM) device. These methods enable holographic display and to alleviate the issues in using two separated SLMs trying to achieve the same. Further, the design techniques and methods to suppress adjacent pixels’ crosstalk due to fringe field effect (FFE) [1] in 2D array are amenable to ensure higher resolution with pixel pitch down to 1¼m for compact size and higher pixel numbers beyond 8K×4K. It mitigates to reduce chores of pixel‐to‐pixel alignment, and to enhance image clarity and quality within a single LCoS‐SLM. It will be applicable to enable holographic display with such unique LCoS‐SLM particularly for AR/VR/MR smart glasses applications [18] [19] [20] once being fabricated in the future.