材料科学
阻燃剂
碳纳米管
复合材料
涂层
膨胀的
石墨烯
复合数
环氧树脂
烧焦
氧化物
化学工程
纳米技术
热解
工程类
冶金
作者
Chunlin Chen,Guoqing Xiao,Fei Zhong,Shaotang Dong,Zhengwei Yang,Chunyan Chen,Mingtan Wang,Rui Zou
标识
DOI:10.1016/j.porgcoat.2021.106598
摘要
In this study, the synergistic effect of carbon nanotubes (CNTs) and graphene oxide (GO) on the flame retardant properties of waterborne intumescent epoxy coatings was investigated. Firstly, bio-inspired polydopamine (PDA) was wrapped on the surface of CNTs to increase their water dispersibility and provide them with abundant reactive functional groups. Then, the 3-Aminopropyl triethoxysilane (KH550) was grafted on CNTs/PDA surface. Subsequently, the GO was combined with the modified CNTs by chemical reaction to obtain the [email protected] hybrids. The results showed that the composite coating with [email protected] hybrids had better fire retardant performance than the addition of CNTs or GO nanosheets alone. In contrast, the composite coating loaded with 1.5% of [email protected] hybrids exhibited the lowest backside temperature (168.2 °C), indicating its highest thermal insulation performance. Moreover, the results of the furnace storage experiments displayed that the [email protected]1.5%/EP sample exhibited the maximum expansion height (13.7 mm) and expansion rate (10.79) due to the hybrids effectively hindering the escape of the foamed gas into the air. In addition, the [email protected]1.5%/EP composite coating exhibited the maximum Tmax (370.4 °C) and char residue (28.8%) during the TGA test, which resulted in its most excellent fire retardant performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI