High Entropy Alloy Electrocatalytic Electrode toward Alkaline Glycerol Valorization Coupling with Acidic Hydrogen Production

Electrochemical glycerol oxidation reaction (GOR) is an attractive alternative anodic reaction to oxygen evolution reaction for a variety of electrolytic synthesis, thanks to the possibility of mass production of glycerol from biomass and the relative low thermodynamic potential of GOR. The development of high-activity cheap electrocatalysts toward GOR yet faces a daunting challenge. Herein, we experimentally prepare a new range of high entropy alloy (HEA) self-supported electrodes with uniform HEA nanoparticles grown on carbon cloth. The systematic electrochemical studies verify that the HEA-CoNiCuMnMo electrode exhibits attractive performance for GOR electrocatalysis with low overpotential and high selectivity toward formate products. The surface atomic configurations of HEA-CoNiCuMnMo are studied by a self-developed machine learning-based Monte Carlo simulation, which points out the catalytic active center to be Mo sites coordinated by Mn, Mo, and Ni. We further develop a hybrid alkali/acid flow electrolytic cell by pairing alkaline GOR with acidic hydrogen evolution reaction using the HEA-CoNiCuMnMo and the commercial RhIr/Ti as the anode and the cathode, respectively, which only requires an applied voltage of 0.55 V to reach an electrolytic current density of 10 mA cm^-2 and maintains long-term electrolysis stability over 12 days continuous running at 50 mA cm^-2 with Faraday efficiencies of over 99% for H₂ in the cathode and 92% for formate production in the anode.