Factors Contributing to Fatigue Cracking in Flexible Pavements in Oklahoma: A Case Study Using Laboratory and Field Investigation and AASHTOWare Simulation

ABSTRACT Fatigue cracking is one of the major structural distresses in flexible pavements. In this study, probable causes of fatigue cracking were investigated using field and laboratory testing and In this study, probable causes of fatigue cracking were investigated using field ang laboratory testing and AASHTOWare Pavement ME Design (PMED) simulations. Field tests including Ground Penetrating Radar (GPR), Falling Weight Deflectometer (FWD), and Dynamic Cone Penetration (DCP) were performed on a flexible pavement section of US 412 located in Noble County, Oklahoma. Also, asphalt cores and soil samples were collected for laboratory testing. The GPR test results revealed significant delamination in the asphalt layer. Also, the GPR images indicated that the disturbance zone was confined within the asphalt layer and cracks were generated from surface as well as from existing pavement layers below. The DCP and FWD test results indicated that the pavement section was not structurally adequate to support traffic and needed rehabilitation in the near future. The moduli of the asphalt layers were found to be quite low, indicating improper compaction during construction. Also, the densities of the top-lifts of the asphalt cores were found to be low. Moreover, the cracking resistance of the extracted asphalt cores was poor based on the Illinois flexibility index test results. Superpave Performance Grade of the extracted binder indicated excessive aging of the binder because of long exposure to the environment. The brittleness of mix resulting from aging was considered a potential contributor to fatigue cracking of the pavement at this site. A parametric study was conducted to understand the variation of fatigue cracking with the changes in input properties in PMED, namely pavement structural components and material properties. Pavement thickness, roadway densities, and layer moduli of existing underlying pavement were found as the most influential factors. The findings of the parametric study supported the findings of the field and laboratory investigation.