变压器
电感器
正激变换器
占空比
电压
材料科学
反激变换器
均方根
电气工程
计算机科学
电子工程
控制理论(社会学)
升压变换器
工程类
控制(管理)
人工智能
作者
Shivangi Sinha,Branko Majmunović,Dragan Maksimović
标识
DOI:10.1109/compel52896.2023.10221063
摘要
This paper presents a 4S V-to-1 V stacked direct forward (SDF) dc-dc converter consisting of four 12 V-to-1 V direct forward (DF) modules connected in input-series output-parallel (ISOP) configuration. In each DF module, there is no secondary-side filter inductor, and a single-ended forward transformer is driven at a high duty cycle to reduce the switch root-mean-square currents. An active clamp is employed on the primary side to reset the transformer, limit the switch voltage stress, and facilitate zero voltage switching. The approach is verified by simulation results on a 12 V-to-1V, 50A, 200kHz prototype module using GaN devices and a planar transformer, and having a peak predicted efficiency of 93.4% and the full-load predicted efficiency of 89.3%. Experimental results are presented for a 12 V-to-1 V DF prototype.
科研通智能强力驱动
Strongly Powered by AbleSci AI