材料科学
聚二甲基硅氧烷
共聚物
聚合物
图层(电子)
相(物质)
表面粗糙度
化学工程
复合材料
块(置换群论)
高分子化学
有机化学
几何学
化学
数学
工程类
作者
Hartmut Fischer,Karin Tempelaars,Aat Kerpershoek,Theo J. Dingemans,Mazhar Iqbal,H. van Lonkhuyzen,Boris Iwanowsky,Christopher O. A. Semprimoschnig
摘要
Polimide-block-polydimethylsiloxane (PI-b-PDMS) block copolymers have been synthesized from commercially available amino-terminated polysiloxanes with different molecular weights, for use as polymeric materials resistant to the low earth orbit (LEO) space environment. A structural optimization with respect to maximum environmental protection has been performed by varying the PDMS block length as well as the architecture of the block copolymers spanning from multiblock to triblock and star-shaped morphologies. The synthesized polymers and casted films show good mechanical and thermal performance. For block copolymers with a load of 2% PDMS (in the case of the multiblock copolymers), a complete surface coverage of the PDMS has been found. It has been shown that the transfer of the surface enriched PDMS layer into a thin silica layer after atomic oxygen (AO) exposure results in a drastic decrease in AO erosion rate. The silica layer protects the underlying material from oxygen initiated erosion resulting in a drastic decrease of surface roughness. This phenomena is observable for loads as small as 6 wt % PDMS.
科研通智能强力驱动
Strongly Powered by AbleSci AI