The effect of substrate bias voltage on the mechanical and electrochemical corrosion properties of multilayered CrN/CrAlN coatings produced by cathodic arc evaporation

Abstract The multilayered CrN/CrAlN film was deposited on the SS420 substrate by cathodic arc evaporation technique. The effect of substrate bias voltage was investigated on the microstructure, surface morphology, and mechanical and electrochemical corrosion properties of the deposited film. The deposited CrN/CrAlN coatings were characterized by X‐ray diffraction and field emission scanning electron microscope techniques. Mechanical properties, corrosion resistance, and surface morphology of the coated samples were studied by nano‐indentation, polarization test, electrochemical impedance spectroscopy, and atomic force microscopy, respectively. Adhesive and dense nanostructure CrN and CrAlN phases were successfully deposited on the substrate. The refinement of the coating crystallite was observed from 31.2 to 24.3 nm by increasing the substrate bias voltage, this improved the mechanical properties of the coating. The number of macroparticles, pinholes and porosities, and the surface roughness of coatings significantly decreased by increasing the substrate bias voltage. The CrN/CrAlN coating reduced the corrosion current density in contrast to the SS420 substrate. Better corrosion resistance was obtained for the coating deposited at 150 V of bias voltage due to lower defects in the film structure.