Investigation of the Tensile Strength of Adhesive-Bonded Steels Using Surface Treatments

This study explores the tensile strength of adhesive joints in steel, focusing on the influence of heat treatment and diverse surface modifications. Results indicate a notable relationship between annealing temperature and tensile strength, with the most favorable outcomes identified at 90 min and 165 °C. Particularly, surfaces treated through turning, sandblasting, and plasma treatment (type C) consistently outperformed other methods. A standout revelation emerged from the turned, sandblasted, and plasma-treated surface (C), showcasing an exceptional tensile strength of 69.06 MPa. Load-holding tests underscored its resilience under diverse load conditions. Surface analyses, including roughness measurements, wetting characteristics, and Scanning Electron Microscope imaging, provided valuable insights into structural transformations induced by different treatments. Chemical composition examinations unveiled significant alterations post-plasma treatment, impacting surface chemistry and contributing to an outstanding tensile strength of 67.63 MPa. In essence, this research offers a glimpse into the nuanced factors influencing adhesive joint strength in steel. The turned, sandblasted, and plasma-treated surface emerges as a promising avenue, sparking further curiosity into the underlying mechanisms propelling superior tensile strength in adhesive joints.