Application of digital guide plate with drill-hole sharing technique in the mandible reconstruction

Background/purpose: With the development of computer-assisted surgery, digital guide plate was widely used in vascularized bone flap grafts for mandibular reconstruction. The purpose of this study was to design and manufacture a digital guide plate with drill-hole sharing for mandibular reconstruction and assess for surgical accuracy. Materials and methods: 17 patients that required mandibular reconstruction using fibula free flap or iliac crest free flap were included in the study. The computed tomography (CT) data of the patient's mandible and pelvis or fibula were acquired preoperatively. A surgical simulation was then performed using computer-aided surgical simulation (CASS) technology based on above date, which allowed the design of two cutting guide and a repositioning guide for mandibular reconstruction. After surgery, the accuracy of reconstruction was evaluated by superimposing the postoperative image onto the preoperative image of mandible, recording the linear and angular deviation of landmarks, measuring the differences between the planned and actual outcomes. Results: The osteotomy and repositioning of fibula or iliac crest segments were successfully performed as planned using surgical guides. The digital guide plate with drill-hole sharing showed excellent accuracy, When the iliac crest or the fibula free flap were used for mandibular reconstruction, the largest mean differences between the preoperative and postoperative were 1.11 mm and 2.8° or 1.3 mm and 3.87°. Conclusion: The digital guide plate with drill-hole sharing designed preoperatively provides a reliable method of for the mandibular reconstruction. This can assist surgeons in accurately performing osteotomy and repositioning fibula or iliac crest segments during the mandibular reconstruction.