材料科学
涂层
溅射沉积
冶金
腐蚀
腔磁控管
溅射
兴奋剂
复合材料
光电子学
薄膜
纳米技术
作者
Shen Tao,Hui Fen Peng,Anqin Zhang,Hongbo Guo
标识
DOI:10.1016/j.apsadv.2025.100766
摘要
Here, we propose a rapid coating design and verification approach via magnetron sputtering, which is first applied to Zr-doped MCrAlY coatings. By utilising the compositional gradient of the as-deposited coatings, ten candidates with varying Zr contents were evaluated. Among them, the coating with 0.15 wt.% Zr exhibited the best oxidation and corrosion resistance. Results show that moderate Zr doping promotes the θ-Al 2 O 3 to α-Al 2 O 3 transformation and delays the β to γ/γ′ phase transition, leading to the formation of a dense and smooth oxide scale. However, EBSD analysis reveals that increasing Zr content coarsens the grain size, and excessive Zr accelerates Al depletion and promotes spinel formation. During oxidation, a semicoherent γ/γ′ to α-Al 2 O 3 interface is formed, whereas in corrosion-tested samples, the β-NiAl to α-Al 2 O 3 interface becomes incoherent, weakening interfacial bonding. Nevertheless, Zr diffusion from the coating into the thermally grown oxide (TGO) forms Zr-rich bands, which significantly inhibit Al outward diffusion. Thermo-Calc simulations indicate that the volume fraction of β-NiAl at 1100 °C (low Al content β-NiAl) is much higher than at 900 °C (high Al content β-NiAl), and that Zr has little effect on the overall phase distribution. Coatings prepared via arc ion plating further confirm that Zr-doped coatings outperform Zr-free ones in cyclic oxidation and corrosion resistance.
科研通智能强力驱动
Strongly Powered by AbleSci AI