蚀刻(微加工)
材料科学
光电子学
干法蚀刻
反应离子刻蚀
表面粗糙度
晶体管
阈值电压
电子迁移率
半导体
电介质
图层(电子)
纳米技术
电压
电气工程
复合材料
工程类
作者
Weining Liu,Guohao Yu,Jiaan Zhou,Zicheng Yu,Xing Wei,Wenxin Tang,Li Zhang,Baoshun Zhang
标识
DOI:10.1021/acsaelm.1c01267
摘要
We demonstrated that electrodeless photoelectrochemical (ELPEC) etching can be used to realize recessed gate normally off GaN metal–insulator–semiconductor high electron mobility transistors (MISHEMTs). A slower speed etching of 0.36 nm/min has been achieved by the ELPEC etching, and it was easy to control the etching depth at this etching rate. The normally off GaN MISHEMT has been fabricated with a 20 nm atomic layer deposition hafnium oxide (HfO2) gate dielectric after a 55 min ELPEC etching, and low etched surface roughness has been obtained. A threshold voltage shift from −3.6 to 0.5 V has been achieved, performing with normally off properties. A maximum output current of 500 mA/mm and a high maximum field-effect mobility of 194 cm2/V·s has been obtained due to the high quality etching surface created with ELPEC etching.
科研通智能强力驱动
Strongly Powered by AbleSci AI