Optimized Variable Flip Angle Technique for Specific Absorption Rate Reduction in Metal Artifact Reduction Magnetic Resonance Imaging

Objectives: Metal artifact reduction MRI can exceed specific absorption rate (SAR) limits due to high-bandwidth radiofrequency pulses, causing scan interruptions and prolonged acquisition times. The aim of the current study is to reduce SAR and potentially scan time in metal artifact reduction MRI using an optimized variable refocusing flip angle (VRFA) scheme compared with the standard constant refocusing flip angle (CRFA). Materials and Methods: Three VRFA variants (VRFA1 to VRFA3) were developed to maximize tissue signal and contrast while minimizing SAR and image blur. The optimal variant was selected through quantification of metal artifacts and image blur in phantoms and tissue signal in a volunteer. Patients with hip arthroplasty underwent CRFA and optimal VRFA imaging using high-bandwidth turbo-spin-echo (HBW-TSE) and compressed-sensing slice-encoding-for-metal-artifact-correction (CS-SEMAC) sequences. Three readers ranked paired CRFA and VRFA scans for quality. Analyses included repeated measures ANOVA, noninferiority testing, and paired t /Wilcoxon signed-rank tests. Results: CRFA and VRFA1 to VRFA3 showed no significant differences in image blur (full-width-at-half-maximum, mean ± SD, 1.9 ± 0.2 vs 1.9 ± 0.2 vs 1.9 ± 0.3 vs 1.9 ± 0.3 pixels, P = 0.06) or metal artifacts (8.2 ± 2.8 vs 8.4 ± 2.7 vs 8.4 ± 2.6 vs 8.4 ± 2.7 pixels, P = 0.57). The optimal VRFA variant (VRFA3) preserved 81% of CRFA fat-muscle contrast at 77% SAR and 70% scan time on proton-density (PD), and 94% of fluid-muscle contrast at 80% SAR and 67% scan time on short-tau-inversion-recovery (STIR). In 23 patients [mean age, 67.3 y ± 12.2 (SD); 14 females], the optimal VRFA was noninferior to CRFA in all quality metrics (all 95% CI < noninferiority margin = 0.1) and significantly reduced SAR (mean, PD-HBW-TSE/STIR-HBW-TSE/PD-CS-SEMAC/STIR-CS-SEMAC: 1.11/1.35/1.17/1.18 vs 1.85/1.83/1.49/1.46 W/kg, all P ≤ 0.001). In HBW-TSE, reduced SAR allowed longer echo trains and 15% to 32% shorter scan times. Conclusion: Metal artifact reduction MRI with VRFA reduces SAR without compromising image quality. It allows shorter acquisitions in HBW-TSE.