A Cascaded Generalized Integral Control for Multiobjective Grid-Connected Solar Energy Transfer System

A cascaded generalized integral control algorithm is presented in this article for a solar energy transfer system (SETS), connected to the grid. The control algorithm introduces a two part fundamental component extraction such as, primary harmonics filter with higher order harmonic reduction and dc-offset rejection, and secondary fine fundamental component tuning with fractional order and lower harmonics rejection property. This SETS transfers electrical energy converted from solar radiant energy, efficiently to the three-phase distribution grid. The two-stage system consists of a boost type dc–dc converter on the primary side. Moreover, the incremental conductance algorithm-based operation of the boost converter ensures maximum power output from the photovoltaic (PV) array. This system is designed to meet load demands and feeds remaining power to the grid. It mitigates the reactive power and harmonics requirements of the load at any irradiance level, and thereby keeps the balanced sinusoidal grid currents, in-phase with the respective grid voltages. As the PV array power and load power are varying, performance of SETS with adverse operating conditions is validated in this work. A prototype is developed and tested under varying irradiance conditions as well as nonlinear unbalanced load. The steady-state and dynamic behaviors of the system during transient operating conditions are expressed to substantiate the acceptability of the control technique for multiobjective grid-connected SETS.