纳米-
发光效率
纳米技术
材料科学
光电子学
复合材料
图层(电子)
作者
Chaowei Cheng,Yun Lin,Chaoyu Lin,Wan Chen,Hang Jiang,Liancheng Wang
摘要
Augmented reality (AR) is emerging as a next‐generation display technology that enhances interactions between users, digital content, and the real world. Micro light‐emitting diode (Micro‐LED) is considered as the most promising AR display technology due to its advantages, including small chip size, high contrast, high pixel density, low power consumption, and high response frequency. However, the significant reduction in size introduces severe sidewall etching damage, leading to reduced quantum efficiency. Additionally, the luminous efficiency of micro‐LED is hindered by the refractive index mismatch at the p‐GaN/air interface and the presence of surface metal electrodes, which trap a portion of the emitted light within the chip. Therefore, measures are required to address these challenges and improve performance. In this work, we numerically investigated the effect of continuing the in‐situ integration of microlens arrays and nanolens arrays on the luminous efficiency of micro‐LED after integrating SiO2 thin film on the mesa of micro‐LED. Compared to conventional micro‐LED, the luminous efficiency of microlens micro‐LED increased by 19.16%, while that of nanolens micro‐LED improved by 24.70%. Additionally, we found that the chip size of micro‐LED also affects luminous efficiency. As the mesa size increases, the luminous efficiency improves due to the larger proportion of top‐emission area in larger sized micro‐LED. Our simulation work provides valuable insights into the effects of integrating micro‐nano structures on the mesa of micro‐LED for enhancing luminous efficiency, and can also contribute to the high brightness requirements of AR display engines.
科研通智能强力驱动
Strongly Powered by AbleSci AI