A Method to Identify Pore Fluids in Heterogeneous Conglomerate Reservoirs Using a Nuclear Magnetic Resonance Log with Oil-Based Mud Invasion

Summary Nuclear magnetic resonance (NMR) logging has been extensively utilized for identifying pore fluids in recent years. However, after oil-based mud (OBM) invasion, OBM filtrate partially takes the place of the original fluid in the reservoir and the morphology of the NMR T2 (transverse relaxation time) spectrum changes. OBM invasion makes it difficult to identify the formation fluid using routine NMR fluid identification methods. In this study, we took heterogeneous conglomerate formation in the northwestern Junggar Basin as a case study and carried out core experiments under four conditions (viz., water-saturated, OBM displacing water, oil-saturated, and OBM displacing oil) and simulated the states of OBM invasion into water and hydrocarbon-bearing formation. Comparative analysis finds that when the OBM invades the water layer, the movable peak of the T2 spectrum primarily reflects the bulk relaxation characteristics of OBM filtrate, whereas when the OBM invades into the oil layer, the T2 spectrum may exhibit a three-peak distribution, where the first peak mainly indicates irreducible water, the second peak reflects OBM filtrate, and the third peak primarily reflects nondisplaced oil. To facilitate fluid identification, two T2 cutoffs are adopted to divide the T2 spectrum into three segments, and combined with the T2 geometric average, a fluid identification factor (ifluid) is proposed. Finally, identification criteria for reservoir type are established on the NMR logging and drillstem test data. The field application verifies the reliability of the proposed methods. These methods realize the identification of oil layers under OBM drilling and guide the subsequent production and development of oil reservoirs.