The Importance of Precise Reaction Condition Control for the Comparison of Photocatalyst Materials on the Example of Hydrogen Peroxide Formation over Polymeric Carbon Nitrides

Abstract In our study, we aimed to show how different reaction parameters can affect production rates using photocatalytic hydrogen peroxide formation by different polymeric carbon nitrides (PCN). For this purpose, selected materials were first compared under the same reaction conditions and compared with TiO 2 (P25). We also show that different light intensities can have a different influence on seemingly similar materials. Since hydrogen peroxide production in the presence of an electron donor proceeds mainly by reduction of oxygen, we also show an influence of the oxygen flow on the formation rates. Thus, with high oxygen fluxes and high intensities of irradiated light, we were able to achieve an H 2 O 2 concentration of 125 mM after about 25 h. Finally, the two best PCN materials were selected to measure light intensity dependence at different wavelengths up to visible light. It was found that they behaved differently at the different wavelengths and thus it could be shown that an exact specification of the reaction parameters is indispensable for comparisons in the literature.