法拉第效率
碳化
分离器(采油)
多硫化物
复合数
化学工程
材料科学
吸附
催化作用
化学
电极
复合材料
有机化学
电化学
电解质
物理
工程类
热力学
物理化学
作者
Yun Guo,Peisen Wu,Hao Zhong,Jianlin Huang,Guozheng Ma,Zhiguang Xu,Yongbo Wu,Akif Zeb,Xiaoming Lin
标识
DOI:10.1016/j.jcis.2022.06.036
摘要
Lithium‑sulfur batteries (LSBs) are gradually replacing conventional lithium-ion batteries (LIBs), credited to their high theoretical capacity, low cost, and non-toxicity. Nevertheless, the substantial capacity degradation caused by the polysulfide shuttling during charging and discharging has seriously hindered the commercialization of LSBs. Separator modification with functionalized carbon materials has been found to catalyze the breakdown of polysulfides, thereby improving the efficiency of LSBs. Herein, we synthesized Ni/Co-PBAs with KB structures to subsequently derive Ni/Co/KB composites by a carbonization process, which were later used as a modifier layer on the barrier in LSBs in order to effectively alleviate the shuttle problem. The capacity of the Ni/Co/KB composite decorated separator is found to be 1032 mAh/g at 0.5 C with a coulombic efficiency closer to 100%. In the long-term cycling capability evaluation, the initial cycle is approximately 802.9 mAh/g at 1 C, while capacity retention after 400 cycles is also 678.8 mAh/g, with a high-capacity retention rate of 84.5%. The potential of these composites as modifying materials for superior LSBs separators is verified by experimental and theoretical methods.
科研通智能强力驱动
Strongly Powered by AbleSci AI