Combustion Stability Assessment for Utility Pulverized Coal-Fired Boilers under Low Loads

Based on the influence of chemical equivalence ratio on the combustion stability of utility pulverized coal-fired boilers and the control theory about system stability, a combustion stability index, CSI, which refers to the maximum reduction ratio of the fuel mass flow rate that can be overcome by the stable combustion process under a constant air mass flow rate, was proposed to assess quantitatively the combustion stability in the boilers. MLO, the Minimum Load of Operation with stable combustion not supported by firing oil, and MCQ, the Minimum Coal Quality, which gives the lowest heat values of coals with different volatile matter contents for stable operation of boilers, are defined on the basis of CSI. In order to predict MLO and MCQ, a simple chemical reaction system model has been modified by means of the concept of lean flammability of gaseous fuels. A three-dimensional combustion simulation code integrated with the modified model was used to study the stability of combustion process in a 200MWe pulverized coal fired utility boiler. The predictions of MLO and MCQ agreed confidently with operational experiences.