乳状液
复合数
材料科学
膜
化学工程
分离(统计)
复合材料
化学
计算机科学
工程类
生物化学
机器学习
作者
Hyun Woong Kwon,Ralph Rolly Gonzales,Pengfei Zhang,Bowen Li,Kwang Seop Im,Jun Ho Park,Tae Kyung Lee,Hideto Matsuyama,Sang Yong Nam
出处
期刊:npj clean water
[Nature Portfolio]
日期:2025-05-10
卷期号:8 (1): 37-
被引量:31
标识
DOI:10.1038/s41545-025-00468-0
摘要
Hollow fiber membranes were fabricated using polyvinylidene fluoride (PVDF) via the thermally induced phase separation method for oil-water separation. By introducing glycerol triacetate (GTA) or propylene carbonate as an extruded solvent, membrane porosity and pore size were controlled, significantly enhancing water permeance. The highest porosity and permeance were achieved with GTA as the co-extruded solvent. To further improve separation performance, a polyvinyl alcohol (PVA) coating was applied, forming a superhydrophilic and superoleophobic membrane composite. The coated membranes exhibited complete water absorption (0° contact angle) while repelling oil, preventing droplet adhesion. Antifouling performance was significantly improved, with flux recovery ratios exceeding 90% compared to 2–26% for uncoated membranes. The best-performing membrane achieved a high oil-in-water emulsion permeance of 3551 LMH/bar and 99.2% soybean oil removal efficiency. These findings demonstrate the potential of superhydrophilic and superoleophobic membranes with controlled porosity for efficient oil-water separation.
科研通智能强力驱动
Strongly Powered by AbleSci AI