有限元法
结构工程
计算机科学
可靠性工程
工程类
标识
DOI:10.1115/pvp2024-122422
摘要
Abstract Burst pressure prediction of corroded pipes in Finite Element Analysis (FEA) has commonly adopted various forms of stress-based criteria by comparing the von Mises stress in the corroded ligament with a reference stress associated with the material’s true Ultimate Tensile Strength (UTS). However, many variations and inconsistencies exist in terms of how the von Mises stress is selected and what is the appropriate reference stress. These inconsistencies not only cause confusion in selecting the appropriate failure criterion, but also lead to challenges in accurate prediction of burst pressure for corroded pipes. In light of physical burst test evidence, a plastic instability-based failure criterion was recently proposed for FEA prediction of burst pressure of corroded pipes. This new failure criterion is fundamentally identical to that used for predicting the burst pressure of uncorroded pipes. Based on the physical burst test results from a recent research program, this study critically examined the prediction performance of the plastic instability-based criterion and various stress-based criteria by statistical methods. The plastic instability-based criterion clearly demonstrated a more consistent prediction performance than the stress-based criteria. As an important implication of this study, the new failure criterion significantly improved the confidence of FEA prediction of burst pressure for corroded pipes in the absence of physical burst tests. The findings of this study also confirmed the ductile failure mechanism of corroded pipes and therefore demonstrated the importance of incorporating the strain hardening property in pipe corrosion assessment models.
科研通智能强力驱动
Strongly Powered by AbleSci AI