Optimization of dry sliding wear behaviour of industrial wastes reinforced aluminium based metal matrix composites

Abstract Marble dust and basalt powder are industrial waste generated during the machining of marble stone and basalt rock. This paper presents an approach for the optimization of dry sliding wear parameters of aluminium 7075 reinforced with marble dust and basalt powder hybrid metal matrix composite using Taguchi based grey relational analysis. In this work, the composite is fabricated by stir casting technique and the wear parameters namely load, sliding velocity and sliding distance are optimized with consideration of multi responses such as wear rate and coefficient of friction. Experiments are conducted as per Taguchi's L9 orthogonal array. A grey relational analysis is carried out and grey relational grade is obtained. Based on the grey relational grade, optimum level of wear parameters has been identified by analysis of variance. The test results are validated by conducting the confirmation test. Experimental results have shown that the sliding velocity is the most effective factor among the control parameters on dry sliding wear, followed by the sliding distance and load. Finally, the micro structural investigations on the worn surfaces are performed by scanning electron microscope.