过程(计算)
计算流体力学
吸附
材料科学
工艺工程
化学工程
工艺设计
环境科学
化学反应器
热力学
反应堆设计
过程建模
废物管理
工作(物理)
响应面法
核工程
工程设计过程
作者
Ali M. Sefidan,Jari Vepsäläinen
标识
DOI:10.1016/j.csite.2025.107055
摘要
In this study, a coupled Computational Fluid Dynamics (CFD) and Linear Driving Force (LDF) model was developed to simulate CO 2 adsorption onto activated carbon which is a promising approach for carbon capture and storage systems. The model captures the dynamic interplay between fluid flow, heat transfer, and adsorption within a packed bed, and was validated against experimental data. Parametric studies revealed that increasing bed porosity from 0.1 to 0.7 accelerated adsorption by up to 22%, but reduced total CO 2 uptake by over 66% due to lower adsorbent mass. An annular-shaped reactor with dual cooling surfaces reduced breakthrough time by 60% compared to the standard cylindrical reactor, with only a 10% increase in specific energy usage. Radial CO 2 injection also improved adsorption kinetics over standard reactor. Additionally, raising the inlet pressure from 3 bar to 5 bar increased CO 2 uptake by 35% with a 17% rise in energy consumption, while increasing the cooling temperature from 5 °C to 10 °C reduced uptake by 11% and lowered energy use by 15%. These results offer design-level insights for optimizing CO 2 capture systems under realistic process conditions.
科研通智能强力驱动
Strongly Powered by AbleSci AI