Investigation of Mechanochemically Treated Municipal Solid Waste Incineration Fly Ash as Replacement for Cement

Municipal solid waste incineration (MSWI) fly ash has been classified as hazardous waste in China because of the leachable toxic heavy metals and high concentrations of chlorides and polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). Currently, the main treatment method is still landfilling after chemical treatment or cement solidification, and an effective approach to realize fly ash utilization is still lacking. In the present work, the fly ash was firstly water-washed to remove the soluble chlorine salts, which can improve the performance of the produced cement mortar in later work. Mechanochemical pre-treatment was adopted to destroy the PCDD/Fs and improve the heavy metals’ stabilization. The results show that 75% of PCDD/Fs can be degraded and that most of the heavy metals are stabilized. After the mechanochemical pre-treatment, the average particle size of the fly ash decreases to 2–5 μm, which is beneficial for promoting the activation energy and accelerating the hydration process in cement mortar production. The compressive and flexural strengths of the fly ash cement mortar improve to 6.2 MPa and 32.4 MPa, respectively, when 35% of the OPC is replaced by treated fly ash. The similarity in the 3-day and 28-day strength with or without the addition of the treated ash shows the light influence of the fly ash addition. Thus, the mechanochemical process can stabilize the heavy metals and activate the fly ash, allowing it to partly substitute ordinary Portland cement in building materials, such as cement raw materials and concrete.