Effect of process parameters on porosity defects in Al-Si alloy hot rolling

Hot-rolled Al-Si alloy sheets are used to be formed Al alloy welding additions and cladding materials that are widely used in the aviation, automotive, and air conditioning industries. However, if parameters of hot-rolling process are not properly selected, porosity defects during casting will lead to cracks or fractures in Al-Si alloy sheets. This study based on meso-damage theory and established a damage equation describing porosity defects in the hot rolling process. The parameters of GTN (Gurson-Tvergaard-Needleman) void defect evolution, including the volume fraction of voids in different periods, the plastic equivalent variation of void nucleation, the standard variance of equivalent variation of void nucleation, and the correction coefficient of the material, are determined in this study. A finite element model of the porosity defects is developed based on the determined parameters. The finite element method is used to analyze the effect of different process parameters on the porosity defects and cracks in Al-Si alloy sheets during hot rolling, then we performed the hot rolling test to validate the results. The results show that the void stress and diameter are reduced and the quality of porosity defects is improved by decreasing rolling reductions and increasing the temperature. The optimized process parameters were a 20% depression and a temperature of 550°C.