High-Entropy Metal Diborides: A New Class of High-Entropy Materials and a New Type of Ultrahigh Temperature Ceramics

Abstract Seven equimolar, five-component, metal diborides were fabricated via high-energy ball milling and spark plasma sintering. Six of them, including (Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )B 2 , (Hf 0.2 Zr 0.2 Ta 0.2 Mo 0.2 Ti 0.2 )B 2 , (Hf 0.2 Zr 0.2 Mo 0.2 Nb 0.2 Ti 0.2 )B 2 , (Hf 0.2 Mo 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )B 2 , (Mo 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )B 2 , and (Hf 0.2 Zr 0.2 Ta 0.2 Cr 0.2 Ti 0.2 )B 2 , possess virtually one solid-solution boride phase of the hexagonal AlB 2 structure. Revised Hume-Rothery size-difference factors are used to rationalize the formation of high-entropy solid solutions in these metal diborides. Greater than 92% of the theoretical densities have been generally achieved with largely uniform compositions from nanoscale to microscale. Aberration-corrected scanning transmission electron microscopy (AC STEM), with high-angle annular dark-field and annular bright-field (HAADF and ABF) imaging and nanoscale compositional mapping, has been conducted to confirm the formation of 2-D high-entropy metal layers, separated by rigid 2-D boron nets, without any detectable layered segregation along the c -axis. These materials represent a new type of ultra-high temperature ceramics (UHTCs) as well as a new class of high-entropy materials, which not only exemplify the first high-entropy non-oxide ceramics (borides) fabricated but also possess a unique non-cubic (hexagonal) and layered (quasi-2D) high-entropy crystal structure that markedly differs from all those reported in prior studies. Initial property assessments show that both the hardness and the oxidation resistance of these high-entropy metal diborides are generally higher/better than the average performances of five individual metal diborides made by identical fabrication processing.