材料科学
挤压
成核
各向异性
纹理(宇宙学)
临界切应力
打滑(空气动力学)
合金
冶金
复合材料
光学
流变学
剪切速率
化学
有机化学
人工智能
物理
图像(数学)
热力学
计算机科学
作者
Zixuan Wang,Jie Zheng,Leichen Jia,Waner Liu,Youwang Huang,Zhaoming Yan,Zhimin Zhang,Yong Xue
标识
DOI:10.1016/j.jmrt.2022.08.069
摘要
In order to further explore the effect of pre-aging treatment on large-scale alloys, a pre-aging extruded Mg-9.32Gd-4.02Y-2.16Zn-0.48Zr (wt.%) alloy with large extrusion ratio (ER = 19.5) and extrusion temperature of 450 °C in large-scale (Φ308 mm × 800 mm) was investigated in this paper. It exhibited good properties and a more pronounced anisotropy. The comprehensive performance in the 45° direction was the best. The extrusion direction (ED) presented a high strength, while the transverse direction (TD) showed poor strength and ductility contemporaneously. The main results of strength anisotropy were the alignment orientation of the long-period stacking ordered (LPSO), fine grain strengthening, and texture strengthening. The c-axis of most of the grains in TD samples was perpendicular to the direction of applied stress because of the abnormal <0001>//ED texture, which reduced the ductility. In addition, the formation mechanism of abnormal texture has also been studied. The higher extrusion temperature reduced the critical shear stress (CRSS) of the non-basal slip system, and the higher strain promoted the rotation of the base plane along the principal stress axis under the operation of continuous non-basal slip, resulting in the abnormal <0001>//ED texture due to lattice rotation. On the other hand, dynamic recrystallization (DRX) also greatly affected the generation of the abnormal texture. Firstly, DRX produced a proportion of grains with a nucleation orientation of <0001>, then the subsequent preferential growth of DRX grains led to the vast majority of grains with an orientation tending towards <0001>. However, the former has less effect on abnormal texture than the latter.
科研通智能强力驱动
Strongly Powered by AbleSci AI