Effect of Al–Fe–Mn–Si particle characteristics on the growth morphology and corrosion resistance of anodic oxide film on AA 3003 aluminium alloy

This study examines the impact of Al–Fe–Mn–Si particle characteristics in AA3003 alloy on the morphology and resistance of anodic oxide films against corrosion. The results show that low-silicon-content Al–Fe–Mn–Si particles oxidise simultaneously with the matrix to form a discontinuous porous oxide film, and complex small pores are formed in the porous layer; although high-silicon-content Al–Fe–Mn–Si particles have the same oxidation rate as the alloy matrix, the growth of the oxide film is hindered by unoxidised particles in the porous layer due to the influence of particle size and chemical composition, resulting in uneven growth of the oxide film and ultimately causing defects such as enlarged pores and cracks. A mechanism model for Al–Fe–Mn–Si particles affecting the morphology of oxide film growth was established. Electrochemical test results show that compared with the oxide film of the high-silicon-content alloy, the oxide film of the low-silicon-content alloy has better corrosion resistance performance, with a corrosion potential of −0.512V (compared with −0.836V for the high-silicon alloy) and a corrosion current density of 3.34 × 10−8A/cm2 (compared with 9.614 × 10−7 A/cm2 for high-silicon alloy). The barrier layer attained an elevated impedance value and exhibited self-repairing capabilities.