Influence of Snow Redistribution and Melt Pond Schemes on Simulated Sea Ice Thickness During the MOSAiC Expedition

The observations of atmospheric, oceanic, and sea ice data from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition were used to analyze the influence of snow redistribution and melt-pond processes on the evolution of sea ice thickness (SIT) in 2019 and 2020. To mitigate the effect of missing atmospheric observations from the time of the expedition, we used ERA5 atmospheric reanalysis along the MOSAiC drift trajectory to force the single-column sea ice model Icepack. SIT simulations from six combinations of two melt-pond schemes and three snow-redistribution configurations of Icepack were compared with observations and analyzed to investigate the sources of model–observation discrepancies. The three snow-redistribution configurations are the bulk scheme, the snwITDrdg scheme, and one simulation conducted without snow redistribution. The bulk scheme describes snow loss from level ice to leads and open water, and snwITDrdg describes wind-driven snow redistribution and compaction. The two melt-pond schemes are the TOPO scheme and the LVL scheme, which differ in the distribution of melt water. The results show that Icepack without snow redistribution simulates excessive snow–ice formation, resulting in an SIT thicker than that observed in spring. Applying snow-redistribution schemes in Icepack reduces snow–ice formation while enhancing the congelation rate. The bulk snow-redistribution scheme improves the SIT simulation for winter and spring, while the bias is large in simulations using the snwITDrdg scheme. During the summer, Icepack underestimates the sea ice surface albedo, resulting in an underestimation of SIT at the end of simulation. The simulations using the TOPO scheme are characterized by a more realistic melt-pond evolution compared to those using the LVL scheme, resulting in a smaller bias in SIT simulation.