串行解串
序列化
带宽(计算)
球栅阵列
电子工程
工程类
瓶颈
计算机科学
通信系统
引线键合
节点(物理)
嵌入式系统
串行通信
电气工程
波分复用
英菲尼班德
德拉姆
软件可移植性
光通信
模具(集成电路)
布线(电子设计自动化)
成套系统
同步光网络
插入损耗
作者
Max Sunghwan Min,Drew Hallman-Osinski,Chris Pfistner,Bardia Pezeshki,Alex Tselikov,Cameron Danesh,Emad Afifi,Jianguo Ma,Rob Kalman
出处
期刊:
[Surface Mount Technology Association]
日期:2022-02-01
卷期号:18 (1)
被引量:1
标识
DOI:10.37665/watkchj44579
摘要
SerDes (Serializer/Deserializer) have been used for C2C (chip-to-chip) communications in a system and have recently been developed for D2D (die-to-die) communications in a package or on a 2.5D or 3D passive/active interposer. With advanced silicon and packaging technologies and their design technologies, D2D performance has been dramatically improved and horizontal serial and parallel D2D for 2.5D and MCM chiplets will be available soon. 3D hybrid bonding for vertical D2D is being actively developed for further system integration in a package. Currently, C2C communications in systems is becoming a system performance bottleneck with a need for higher bandwidth (Tbps), lower energy (pJ/bit), and lower latency (ns). SerDes speed has been increased by using advanced silicon node and design technologies for meeting ever-increasing C2C bandwidth requirements, but further speed gains are increasingly difficult due to the electrical loss and crosstalk, impedance mismatches and discontinuities, and nontrivial manufacturing and operational variations of the channel. Another way to increase the C2C bandwidth is to increase the SerDes signal count in a package. BGA package size has been increased for having more SerDes balls in a package, but it is harder for large packages to meet the warpage requirement and to have more routing layers on substrate due to the low yield and higher cost. It is to be noted that SerDes with additional latency for serialization and deserialization can be avoided by using available highly parallel interfaces. Thanks to advanced optical technologies, optical fibers have replaced copper wires used for long-haul communications. Optics is now considered a potential solution providing a parallel optical C2C communications by replacing copper high-speed data links between chips, interposers, packages, boards, and racks in datacenters. While on-board optical technologies are commercially available, co-packaged optical devices that can be fabricated and integrated at high yield in arrays while operating at low power and withstanding the high operating temperatures are still in development. Silicon photonics (SiPh) interconnects have received a great deal of attention but entail the use of various expensive and/or unreliable laser sources and difficult <1um fiber alignment tolerance. This paper addresses packaging challenges based on parallel microLED arrays that can be directly transferred to CMOS and integrated into a heterogeneous opto-electronic package. We will first review the microLED and optical fiber technologies below.
科研通智能强力驱动
Strongly Powered by AbleSci AI