Inkjet-printed low temperature co-fired ceramics: process development for customized LTCC

陶瓷 材料科学 过程(计算) 3d打印 制造工程 工程物理 工程制图 复合材料 工程类 计算机科学 操作系统
作者
Jonas Jaeger,Martin Ihle,Kerstin Gläser,André Zimmermann
出处
期刊:Flexible and printed electronics [IOP Publishing]
卷期号:9 (2): 025022-025022 被引量:7
标识
DOI:10.1088/2058-8585/ad59b3
摘要

Abstract This paper investigates the utilization of digital printing technologies for the fabrication of low temperature co-fired ceramics (LTCC). LTCC offer great opportunities for applications such as antennas, sensors or actuators due to their outstanding properties like low dielectric loss, low permittivity, low coefficient of thermal expansion and at the same time high reliability in harsh environments (heat, humidity, and radiation). LTCC are multilayer circuits that are typically functionalized by screen-printing. This publication investigates the replacement of screen-printing by digital printing processes, such as inkjet and Aerosol Jet printing, to facilitate a more resource-friendly and customizable manufacturing of LTCC. The use of digital printing technologies not only streamlines small-scale productions and development processes but also offers the advantage of achieving miniaturization down to single-digit microns. In this publication, digital printing processes, filling of vias, lamination processes, co-firing at 850 °C and printing on fired LTCC were investigated. Three layers of nanoparticle silver ink were printed on green LTCC tape and 100% of the embedded printed structures were conductive after co-firing. Filling of vias with inkjet printing was investigated and the most important process parameters were found to be the clustering of vias, the amount of active nozzles and the substrate temperature. Printing on fired LTCC demonstrated high precision, and sintering at 600 °C achieved strong adhesion of printed structures to LTCC. These successful findings culminate in presenting a process chain for fully maskless structured, multilayer LTCC.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
小时发布了新的文献求助10
刚刚
rongjian完成签到 ,获得积分10
1秒前
温暖的书竹完成签到 ,获得积分10
1秒前
余忆发布了新的文献求助10
2秒前
虾仁不wink完成签到,获得积分10
2秒前
NexusExplorer的应助被霸气安筠采纳,获得10
2秒前
SciGPT的应助被Lily采纳,获得10
3秒前
酷波er的应助被李小轩采纳,获得10
3秒前
斯文败类的应助被黄俊采纳,获得10
3秒前
千空发布了新的文献求助10
3秒前
碧蓝访风发布了新的文献求助10
3秒前
anger发布了新的文献求助10
3秒前
YYH发布了新的文献求助10
4秒前
SciGPT的应助被zzk采纳,获得10
4秒前
4秒前
今后的应助被sdl采纳,获得10
4秒前
4秒前
李爱国的应助被菜菜捞捞过过采纳,获得10
4秒前
4秒前
4秒前
周伦朗发布了新的文献求助10
4秒前
Wen完成签到,获得积分10
5秒前
元吉的应助被性感锅包肉采纳,获得10
5秒前
吧KO完成签到,获得积分10
5秒前
5秒前
小吉发布了新的文献求助10
5秒前
6秒前
6秒前
7秒前
7秒前
7秒前
刘辞忧完成签到,获得积分10
7秒前
8秒前
江江完成签到,获得积分10
8秒前
古德发布了新的文献求助10
8秒前
阿峤完成签到,获得积分10
8秒前
8秒前
8秒前
朴实寻双完成签到,获得积分10
8秒前
小卢发布了新的文献求助10
9秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
Improving the wear resistance of vehicle gear oil by oil soluble LaF3 nanoparticles and typical additives of gear oil 500
Boundaries and Bodhisattvas 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8183142
求助须知:如何正确求助?哪些是违规求助? 9572420
关于积分的说明 21825253
捐赠科研通 7779922
什么是DOI,文献DOI怎么找? 3433850
关于科研通互助平台的介绍 2558060
邀请新用户注册赠送积分活动 2480124