谐波传动
变形(气象学)
显著性差异
结构工程
反冲
工程类
材料科学
机械工程
数学
复合材料
统计
作者
Yangfan Li,Yingjie Zhang,Ning Zhang,Bingchao Xu
标识
DOI:10.1108/ec-06-2019-0266
摘要
Purpose This paper aims to improve the meshing effect of the gear teeth. It is recommended to analyze the deformation difference between the inner and outer surfaces of the flexspline. The purpose of this paper is to modify the profile of the flexspline based on the deformation difference to improve the transmission accuracy and operating life of the harmonic drive. Design/methodology/approach In this paper, ring theory is used to calculate the deformation difference of the inner and outer surfaces of the flexspline, and the actual tooth profile of the flexspline is corrected based on the deformation difference. Then, the flexspline is divided into multiple sections along the axial direction, so that the three-dimensional tooth profile of the flexspline is modified to improve the gear tooth meshing effect. Findings This paper proves the effect of the deformation difference between the inner and outer surfaces of the flexspline on the tooth backlash, which affects the transmission accuracy and life of the harmonic drive. It is recommended to modify the tooth profile of the flexspline based on the deformation difference, so as to ensure the tooth meshing effect. Originality/value This paper provides a new way for the optimization of the three-dimensional tooth profile design of the harmonic drive.
科研通智能强力驱动
Strongly Powered by AbleSci AI